Showing posts with label Lollipop. Show all posts
Showing posts with label Lollipop. Show all posts

May 28, 2015

// // Leave a Comment

Update Nexus 5 to Android 5.1.1 OptiPop Lollipop Custom ROM

Nexus 5 recently got updated to Android 5.1.1 and here is a custom rom for this device that supports Android 5.1.1 Lollipop. OptiPop is based on official LMY48B factory image. With this custom firmware you get pure AOSP experience with some custom aftermarket features like Statusbar Brightness Control and Double-Tap to Sleep. A lot of under-the-hood optimisations have also been made to make sure that the firmware stays stable, fast and smooth. If interested in Android 5.1.1 for other phones, check out our new Custom ROMs section. Stock and official firmware are always good, but custom ROMs make them better with new features and lots of system tweaks that are not otherwise possible.


This is clearly one of the advantages of rooting your Android phone (read: Benefits of Rooting an Android Device). You can update Nexus 5 to Android 5.1.1 OptiPop Lollipop custom firmware using the tutorial below. This is not an official release by LG/Google, but just a custom ROM which would require a custom recovery like ClockworkMod and your phone to be rooted in order to flash the ROM zip and Google Apps zip files on your phone.

In this tutorial, we will tell you how to install Android 5.1.1 OptiPop Lollipop ROM on Nexus 5 with complete steps and instructions. We also have a set of important tips that you have to keep in mind before proceeding to the tutorial on the next page. Don’t forget to backup your phone as you will have to wipe all your data during the installation process. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get on with the tutorial now.

Disclaimer: All the official firmwares, custom ROMs, software updates, themes, mods, tools, apps, or anything provided in our blog belongs to their respective developers. Most of the custom ROMs we are providing here are from XDA Developers. We (iDroid Horizon) or the respective developers are not responsible if any of our tutorial damage or brick your device. However if you follow our instruction properly, we hope it would not bring you in trouble. If you face any problems with our tutorials, please comment below. We are sure that we can bring your device in original position.

Android 5.1.1 OptiPop Lollipop ROM Details :

This amazing OptiPop custom ROM comes with tons of new features and is based on Android 5.1.1 Lollipop. A quick list of the main features in OptiPop is given below and we are sure you’d love to use this on your Nexus 5:
  • Lollipop 5.1.1 LMY48B
  • AOSP sources based
  • Dark Material or White Layers/RRO Builds
  • Deodexed for Customizability (still user builds though for less debugging and greater battery)
  • ROM built with UBERTC 4.9.3 (for speed and performance)
  • Faster Animations (fling velocity, window animations, faster rotation, etc.)
  • Opticharging to reduce apk size using pngquant which gives up to 70% compression
  • Smoother scrolling code mod for better scrolling
  • Advanced Reboot menu including Soft Reboot option
  • Strict Aliasing
  • Graphite Optimizations
  • O3 Optimizations
  • Built with other optimized compiler flags
  • Art & Bionic optimizations
  • Busybox included
  • Disable Search Bar in Recents
  • Quick pulldown settings
  • Display rotate settings
  • Power notification sound preference
  • Status bar clock and date customizations
  • Statusbar Brightness Control
  • Statusbar Double-tap to Sleep
  • Statusbar Network Traffic Options
  • Statusbar Weather
  • Extended power menu with configuration options
  • Clear all button on recent apps
  • Preference for custom clear all recents button position
  • Volume rocker wake
  • Volume music control
  • Volume adjust preference
  • Volume panel style preference
  • Safe headset volume preference
  • LED control settings
  • Incall vibration
  • Navbar DPI settings
  • Navbar ring target customization
  • Navbar button/layout configuration options
  • Navbar Show arrow keys while typing
  • Nofication drawer tile customization options
  • Nofication drawer show brightness slider
  • Nofication drawer option to have toggles vibrate on touch
  • Privacy Guard
  • Immersive Mode
  • Quick Unlock
  • Kill app longpress back
  • Option to use volume keys to control media volume anytime
  • National data roaming
  • Increasing ring feature
  • Volume panel timeout and option to extend volume panel and control all volumes
  • Dialer lookup settings
  • Pin Keypad Shuffler
  • Statusbar ticker
  • Volume button longpress seeks Music track on screen off
  • SMS Rate Limiting
  • Blacklist Support
  • Wakeup on Charger Enabled/Disable Option
  • SystemUI Restart Option
  • CM Battery Style Options
  • Custom APNs (Updated Regularly) 
  • GPS switched to GLONASS (Russian Alternative to GPS) which locks faster for me.
  • Speed Tweaks
  • Added Custom Carrier Label (with color)
  • Added Custom OTG Storage Notification
  • Heads Up Notification Control
  • DPI Custom Changer
  • Dotted Circle Battery
  • Wakelock Blocker
  • F2FS support for all partitions but system (keep system ext4 this ROM comes with an enforcing kernel)
There are tons of useful articles and how-to guides on iDroid Horizon for the LG Nexus 5, but we think you might be interested in the following posts :
Like this OptiPop ROM based on the latest Android 5.1.1? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

LG Nexus 5 USB Drivers :

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for LG Nexus 5 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Backup and some important tips

Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong. Read below for some important tips on how to backup Android data in a easy process:

Few more important things that you must remember before installing any custom ROMs or Official Firmwares:

  • You might face some problems in connecting your Android device to the computer. How to fix? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
  •  Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage.  Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
  • Most of the tutorials and how-to guides on iDroid Horizon are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model. And also make sure you have an unlocked bootloader (except Samsung).
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial below and update Nexus 5 to Android 5.1.1 OptiPop Lollipop custom firmware.

How to Install Android 5.1.1 OptiPop Lollipop Custom ROM

We have put together a detailed step-by-step instructions guide on how to install Android 5.1.1 OptiPop Lollipop custom firmware on Nexus 5. If you are used to installing custom ROMs on your Nexus 5, then this should not be any different for you.

However, for beginners, you need to root your LG Nexus 5 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

Please make sure your phone fulfills all the requirements and you read the entire tutorial once before actually performing it on your device.
Try this on your own risk. We are not responsible if you mess up with your Nexus 5.
To Remember:
  • This Android 5.1.1 OptiPop ROM tutorial is only for Nexus 5 (hammerhead) and I am not sure if it will work on the other variants of the Nexus 5 on other carriers.
  • Make sure your phone is rooted and has a custom recovery like ClockworkMod installed.
  • Make a Nandroid backup of your previous phone set up before proceeding – for just in case anything goes wrong.
  • Install the Google Apps package if you want the usual Google apps (Gmail, Maps, Play Store, Calendar etc.) on your phone.
NOTE: Installing Android 5.1.1 OptiPop Lollipop Custom ROM will WIPE / DELETE / ERASE everything from your phone if your bootloader is not already unlocked. Please make sure you have a backup of all the data. Read: How to Backup Android Apps and Other Data.

Complete Step-By-Step Instructions:

Step 1 - Download Android 5.1.1 OptiPop ROM and Google Apps for Nexus 5 on your PC, if you haven’t already.

Step 2 - Connect your Nexus 5 to your computer using the USB cable and copy/paste the downloaded Android 5.1.1 ROM zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root (not in any folder).

Step 3 - Please make sure Fastboot is configured and properly installed on your computer. How? See here: How to Set Up ADB and Fastboot with Android SDK.

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Get into the Fastboot/Bootloader Mode on your device. Turn ON the tablet while pressing and holding the Volume Up + Power buttons till you see the Fastboot menu and START on top.

Step 6 - Now to get in the Bootloader Mode. Turn ON the phone while pressing and holding the Volume Up + Volume Down and Power buttons.

Step 7 - Follow the navigation instructions on the screen. Select BOOTLOADER and then go to RECOVERY.

Step 8 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” . Use the Power button to select everything while in the Recovery Mode.

Step 9 - Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.

Step 10 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 11 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 12 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 5.1.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.

Step 12 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Nexus 5 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Nexus 5 should now have Android 5.1.1 OptiPop Lollipop custom ROM installed on your phone! Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!

Have fun playing with the new Android 5.1.1 Lollipop. All the instructions are clearly given above, but if you have any issues, please let us know.  
Read More

May 22, 2015

// // Leave a Comment

Install Benghazi Android 5.1.1 Lollipop on Galaxy Note 2 N7100 [Custom ROM]

Benghazi ROM is the newest among other custom firmwares out there. It is based on latest Android 5.1.1 Lollipop and can be installed on Galaxy Note 2 N7100. This particular device won’t be getting Android 5.1.1 Lollipop officially so the only way to get the latest OS on it is by installing this custom ROM. This ROM includes great features like LED Light customisation, HeadsUp Notification and Apps to SD support as well. If interested in Android 5.1.1 for other phones, check out our new Custom ROMs section.
Benghazi Android 5.1.1 Lollipop on Galaxy Note 2 N7100

You can update Galaxy Note 2 N7100 to Benghazi Android 5.1.1 Lollipop custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip and Google Apps zip files on your phone. Your Galaxy Note 2 should be rooted and have a custom recovery (ClockworkMod recovery / TWRP recovery) installed.

Also See:  How to Switch iPhone into Android - Google Guide New!

As you continue reading below, in this tutorial we will guide you through the entire process of how to install Benghazi Android 5.1.1 Lollipop on Galaxy Note 2 N7100 with complete steps. Don’t forget to read all the tips below that you have to keep in mind before proceeding. Please make sure you backup all your data as given below because this tutorial will wipe your data. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s get to the tutorial now.

Disclaimer: All the official firmwares, custom ROMs, software updates, themes, mods, tools, apps, or anything provided in our blog belongs to their respective developers. Most of the custom ROMs we are providing here are from XDA Developers. We (iDroid Horizon) or the respective developers are not responsible if any of our tutorial damage or brick your device. However if you follow our instruction properly, we hope it would not bring you in trouble. If you face any problems with our tutorials, please comment below. We are sure that we can bring your device in original position.

Benghazi Android 5.1.1 Lollipop ROM Details:

This amazing Benghazi custom ROM comes with tons of new features and is based on Android 5.1.1 Lollipop. A quick list of the main features in Benghazi is given below and we are sure you’d love to use this on your Galaxy Note 2 N7100:
  • Heads up notifications
  • App circle sidebar
  • Apps to SD
  • Custom Notification LED Lights
  • Recent Panel Settings
  • Privacy Options
  • 4Way Reboot
  • Lockscreen Shortcuts
  • Power Saving Mode
  • Double Tap to Lock The Screen
  • Gestures
  • Added New Screen Recorder
  • Adjust CPU Min and Max
  • Performance Settings
  • NetworkSpeed Indicator (when wifi or data is off it will hide)
  • More Efficient Memory on Managing Apps
  • Sound Effects to Enhance Music Playback
  • Increased Background Capacity
  • Optimized Mobile Network (for a faster response)
  • Optimized GPS Positioning (for a faster response)
  • Improved Standby Power Consumption
  • Improved Touch Accuracy
  • Improved Sound Quality
  • Added Beats Audio
  • Added ViPER4Android
  • Removed Nav Bar
  • Support Disable Background Apps
  • User Dictionary’- Added Multi-User
  • Guest User
  • Predictive Text
  • HD True Color Without Any Missed Colors
  • Weather at Notification Panel
There are tons of useful articles and how-to guides on iDroid Horizon for the Samsung Galaxy Note 2, but we think you might be interested in the following posts:
Like this Benghazi ROM based on the latest Android 5.1.1? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note 2 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 2 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Backup and some important tips

Done with USB Driver? Good. Now here we go for some work that you must do before installing this firmware. Please follow the important points that you need to take care of, as we don’t want anyone losing their personal data or apps:
Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong. Read below for some important tips on how to backup Android data in a easy process:
Samsung user can also backup data by using Official Sumsang Kies. If you backup data manually, you will get more options for what to choose from. You can also move your data to other Android devices from different manufacturers, i.e moving Samsung Galaxy S5 backup data to Google Nexus 10. If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

Few more important things that you must remember before installing any custom ROMs or Official Firmwares:

  • You might face some problems in connecting your Android device to the computer. How to fix? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
  •  Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage.  Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
  • Most of the tutorials and how-to guides on iDroid Horizon are for factory unlocked Android devices. We recommend NOT to try our guides if your device is locked to a carrier, unless we have specified the device model or carrier name.
If you find the above tips are helpful for you, please consider giving us a +1 or Like on our Facebook Fan Page to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial below and update Galaxy Note 2 N7100 to Benghazi Android 5.1.1 Lollipop custom firmware.

How to Install Benghazi Android 5.1.1 Lollipop on Samsung Galaxy Note 2 N7100

We have put together a detailed step-by-step instructions guide on how to install Benghazi Android 5.1.1 Lollipop custom firmware on Galaxy Note 2 N7100. If you are used to installing custom ROMs on your Galaxy Note 2 N7100, then this should not be any different for you.

However, for beginners, you need to root your Samsung Galaxy Note 2 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

To Remember:
  • This tutorial is only for installing Benghazi Android 5.1.1 ROM on Samsung Galaxy Note 2 N7100. Please do not try on any other Galaxy Note II variants.
  • Your phone should be rooted and have ClockworkMod recovery installed from before.
  • This tutorial will wipe out all your data. Proceed at your own risk.
  • Perform a Dalvik Cache wipe before proceeding from the recovery mode.
  • Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
  • Make sure you backup all your data in your phone before proceeding.

Entire Step-By-Step procedure:

Step 1 - Download Benghazi Android 5.1.1 ROM Custom firmware and Google Apps for Galaxy Note 2 N7100 to your computer.

Step 2 - Connect and mount your Galaxy Note 2 N7100 USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 5.1.1 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode.

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”  Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” 

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate the Benghazi Android 5.1.1 ROM Zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now
Note: Repeat the same step of installation as in step 10 with Google Apps after installing Benghazi Android 5.1.1 Lollipop Custom ROM.
Your Galaxy Note 2 N7100 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Galaxy Note 2 N7100 should now have Benghazi Android 5.1.1 Lollipop Custom ROM installed on your phone! Go to Settings > About phone to verify.

Need Help?

If you run into any problems during UPDATING Galaxy Note 2 N7100 to Benghazi Android 5.1.1 Lollipop Custom ROM,  feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
Read More

May 15, 2015

// // Leave a Comment

Update Galaxy Note 2 N7105 LTE to Android 5.0.2 Lollipop with CM12 Nightly ROM

You can now experience latest Android Lollipop 5.0.2 on your Samsung Galaxy Note 2 N7105 thanks to CM12 Nightly custom ROM. It is quite sure that the update support from Samsung has ended for this phone, sadly. However, that doesn’t mean you should be stuck with an old Android version. Custom ROMs are one of the few things which make Android popular. Especially when teams like CyanogenMOD are continously working on porting latest revisions to old hardware. CM12 Nightly provide a pure stock experience just like on a Nexus with added tweaks.

Android 5.0.2 Lollipop

You will be able to update Samsung Galaxy Note 2 N7105 to 5.0.2 CM12 Nightly Lollipop using this complete tutorial. Not necessary, but it would be better if your phone is rooted and has a custom recovery installed. A custom recovery will be needed to install 5.0.2 based CM12 Nightly ROM zip and Google Apps zip files, since this is not an official Samsung firmware update.

If this is your very first time installing a custom ROM, we understand you would want to make sure your installation process go as smooth as possible. So before we actually jump to the installation process of CM12 Nightly ROM, let’s take a look below at how to backup all your data. When installing this 5.0.2 Lollipop based custom ROM, your entire data will be wiped clean — like a brand new phone. As a Samsung Galaxy Note 2 N7105 user, you have several options to choose from depending on how you want to store your data. These are the some of the tips given below that we want you to keep in mind and then proceed.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (iDroid Horizon) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial.

5.0.2 CM12 Nightly Lollipop ROM Details:

or those who are new to CyanogenMod, please read the following:
CyanogenMod (pronounced sigh-AN-oh-jen-mod), is a customized, aftermarket firmware distribution for several Android devices (See above for supported devices & how to install CyanogenMod on said devices). Based on the Android Open Source Project, CyanogenMod is designed to increase performance and reliability over Android-based ROMs released by vendors and carriers such as Google, T-Mobile, HTC, etc. CyanogenMod also offers a variety of features & enhancements that are not currently found in these versions of Android.
Here is a quick note for those who are going to install this release of CM12 for the very first time:
NOTE: Since this is not a final build, make sure you know that after installing this firmware update, your Android device can get FC errors, boot loops, several other bugs, apps might not work or worse, your phone might not boot. To fix, you will have to reinstall stock firmware or any other stable custom ROM.
Remember, this is not an official firmware update. This is a custom ROM, based on AOSP release of the Android 5.0.2 Lollipop.
We haven’t really found any major issues or apps that do not work with this Android 5.0.2 CM12 custom firmware.

There are tons of useful articles and how-to guides on iDroid Horizon for the Samsung Galaxy Note 2 N7105, but we think you might be interested in the following posts:
Like this CM12 Nightly ROM based on the latest 5.0.2? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note 2 N7105 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 2 N7105 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Backup and some important tips

Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong. Read below for some important tips on how to backup Android data in a easy process:

Few more important things that you must remember before installing any custom ROMs or Official Firmwares:

  • You might face some problems in connecting your Android device to the computer. How to fix? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
  •  Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage.  Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
  • Most of the tutorials and how-to guides on iDroid Horizon are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model. And also make sure you have an unlocked bootloader (except Samsung).
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or SHARE with others so they can also benefit from these tips!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Samsung Galaxy Note 2 N7105 to 5.0.2 CM12 Nightly Lollipop custom firmware.

TUTORIAL: How to Install 5.0.2 CM12 Nightly Lollipop on Samsung Galaxy Note 2 N7105

We have put together a detailed step-by-step instructions guide on how to install 5.0.2 CM12 Nightly Lollipop custom firmware on Samsung Galaxy Note 2 N7105. If you are used to installing custom ROMs on your Galaxy Note 2 N7105, then this should not be any different for you.

As we mentioned earlier, you need to have a custom recovery installed on your phone. Please do that first and then get back to this tutorial. And before you proceed below, make sure you read the tutorial once before actually performing it on your Android device.

To Remember:
  • This tutorial is only for installing 5.0.2 CM12 Nightly ROM on Samsung Galaxy Note 2 N7105. Please do not try on any other Galaxy Note 2 N7105 variants.
  • Your phone should have a custom recovery installed and should be rooted (optional) from before.
  • This tutorial will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
  • Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.

Complete Step-By-Step Instructions:

Step 1 - Download 5.0.2 CM12 Nightly ROM and Google Apps for Galaxy Note 2 N7105 to your computer.

Step 2 - Connect and mount your Galaxy Note 2 N7105 USB memory to your computer using the USB cable.

Step 3 - Now copy/paste the downloaded 5.0.2 ROM zip and Google Apps zip files to your phone memory / SD card. Make sure the file is in the phone memory / SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Power buttons together. 

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from SDCard”. Using your volume keys, navigate to the 5.0.2 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Google Apps zip file as well and install it on your phone.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Galaxy Note 2 N7105 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Samsung Galaxy Note 2 N7105 should now have 5.0.2 CM12 Nightly Lollipop custom ROM installed on your phone! Go to Settings > About phone to verify.

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
Read More
// // 1 comment

Update Galaxy Note 2 N7105 LTE to Android 5.1.1 Lollipop with CM12 Nightly ROM

CM12.1 based on Android 5.1.1 Lollipop is now officially available for the Galaxy Note 2 (LTE N7105). One of the many advantages of Android include the fact that you can install custom ROMs on old phones which are no longer receiving software updates. In this case, you can experience the latest on your Galaxy Note 2 LTE via CyanogenMod’s CM12.1 ROM. The ROM comes with performance tweaks, custom themes, enhanced drivers and much more. Also, as this is a Nightly, new features will be released with a new build each day. All updates will be arrive automatically through the OTA(Over-the-air) update system.

You will be able to update Samsung Galaxy Note 2 N7105 to 5.1.1 CM12.1 Nightly Lollipop using this complete tutorial. Not necessary, but it would be better if your phone is rooted and has a custom recovery installed. A custom recovery will be needed to install 5.1.1 based CM12.1 Nightly ROM zip and Google Apps zip files, since this is not an official Samsung firmware update.

Update Galaxy Note 2 N7105 LTE to Android 5.1.1 Lollipop

If this is your very first time installing a custom ROM, we understand you would want to make sure your installation process go as smooth as possible. So before we actually jump to the installation process of CM12.1 Nightly ROM, let’s take a look below at how to backup all your data. When installing this 5.1.1 Lollipop based custom ROM, your entire data will be wiped clean — like a brand new phone. As a Samsung Galaxy Note 2 N7105 user, you have several options to choose from depending on how you want to store your data. These are the some of the tips given below that we want you to keep in mind and then proceed.

Also See: Download Galaxy S6 Apps for all Android Devices - APK Files

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (iDroid Horizon) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial.

5.1.1 CM12.1 Nightly Lollipop ROM Details:

or those who are new to CyanogenMod, please read the following:
CyanogenMod (pronounced sigh-AN-oh-jen-mod), is a customized, aftermarket firmware distribution for several Android devices (See above for supported devices & how to install CyanogenMod on said devices). Based on the Android Open Source Project, CyanogenMod is designed to increase performance and reliability over Android-based ROMs released by vendors and carriers such as Google, T-Mobile, HTC, etc. CyanogenMod also offers a variety of features & enhancements that are not currently found in these versions of Android.
Here is a quick note for those who are going to install this release of CM12.1 for the very first time:
NOTE: Since this is not a final build, make sure you know that after installing this firmware update, your Android device can get FC errors, boot loops, several other bugs, apps might not work or worse, your phone might not boot. To fix, you will have to reinstall stock firmware or any other stable custom ROM.
Remember, this is not an official firmware update. This is a custom ROM, based on AOSP release of the Android 5.1.1 Lollipop.
We haven’t really found any major issues or apps that do not work with this Android 5.1.1 CM12.1 custom firmware.

There are tons of useful articles and how-to guides on iDroid Horizon for the Samsung Galaxy Note 2 N7105, but we think you might be interested in the following posts:
Like this CM12.1 Nightly ROM based on the latest 5.1.1? We love it too and we know you are looking forward to install it on your phone now. Now please read below for important tips on how to make sure your installation goes smooth and you do not end up with any problems.

Samsung Galaxy Note 2 N7105 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy Note 2 N7105 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Backup and some important tips

Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong. Read below for some important tips on how to backup Android data in a easy process:

Few more important things that you must remember before installing any custom ROMs or Official Firmwares:

  • You might face some problems in connecting your Android device to the computer. How to fix? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
  •  Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage.  Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
  • Most of the tutorials and how-to guides on iDroid Horizon are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model. And also make sure you have an unlocked bootloader (except Samsung).
If you find the above tips useful and they were helpful to you, please consider giving us a +1 or SHARE with others so they can also benefit from these tips!

All set and ready? Good. Now, let’s proceed with the tutorial on the next page and update Samsung Galaxy Note 2 N7105 to 5.1.1 CM12.1 Nightly Lollipop custom firmware.

TUTORIAL: How to Install 5.1.1 CM12.1 Nightly Lollipop on Samsung Galaxy Note 2 N7105

We have put together a detailed step-by-step instructions guide on how to install 5.1.1 CM12.1 Nightly Lollipop custom firmware on Samsung Galaxy Note 2 N7105. If you are used to installing custom ROMs on your Galaxy Note 2 N7105, then this should not be any different for you.

As we mentioned earlier, you need to have a custom recovery installed on your phone. Please do that first and then get back to this tutorial. And before you proceed below, make sure you read the tutorial once before actually performing it on your Android device.

To Remember:
  • This tutorial is only for installing 5.1.1 CM12.1 Nightly ROM on Samsung Galaxy Note 2 N7105. Please do not try on any other Galaxy Note 2 N7105 variants.
  • Your phone should have a custom recovery installed and should be rooted (optional) from before.
  • This tutorial will wipe out all your data. Make sure you backup all your data in your phone before proceeding.
  • Perform a Dalvik Cache wipe before proceeding from the Recovery Mode.

Complete Step-By-Step Instructions:

Step 1 - Download 5.1.1 CM12.1 Nightly ROM and Google Apps for Galaxy Note 2 N7105 to your computer.

Step 2 - Connect and mount your Galaxy Note 2 N7105 USB memory to your computer using the USB cable.

Step 3 - Now copy/paste the downloaded 5.1.1 ROM zip and Google Apps zip files to your phone memory / SD card. Make sure the file is in the phone memory / SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Power buttons together. 

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”. Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from SDCard”. Using your volume keys, navigate to the 5.1.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Google Apps: Repeat the above step for the Google Apps zip file as well and install it on your phone.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Galaxy Note 2 N7105 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Samsung Galaxy Note 2 N7105 should now have 5.1.1 CM12.1 Nightly Lollipop custom ROM installed on your phone! Go to Settings > About phone to verify.

If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
Read More

May 11, 2015

// // Leave a Comment

Update Android One to Official Android 5.1 Lollipop [LMY47O]

Android One lollipop update is now available for download. You can now update your Android One device to LMY47O Android 5.1.0 Lollipop Official Firmware. We have captured OTA of all the three Android One devices. We have Captured Micromax Android One Lollipop update from android-build@vpbs1.mtv.corp.google.com #1 ! Android One update Lollipop in India has been captured lately. But now all the stock firmware are available to download. We have Captured the following firmwares :
  • Android 5.1 for Karbonn Sparkle V
  • Android 5.1 for Spice Dream UNO
  • Android 5.1 for Micromax Canvas A1
All the three devices are the PURE Android i.e quality certified by Google. Google tests Android One phones to ensure they’re fast and responsive and that they stay that way over time. These device are designed is such a way that it can gets the new version of Android OS from Google soon after it’s released. So stay tuned with us to get the latest Android One update.

Update Android One to Lollipop

Disclaimer: All the official firmwares, custom ROMs, software updates, themes, mods, tools, apps, or anything provided in our blog belongs to their respective developers. Most of the custom ROMs we are providing belongs to XDA Developers. We (iDroid Horizon) or the respective developers are not responsible if any of our tutorial damage or brick your device. However if you follow our instruction properly, we hope it would not bring you in trouble. If you face any problems with our tutorials, please comment below. We are sure that we can bring your device in original position.

Also See: Earn Extra Mobile Recharge with High Paying mCent App — $275 Profit

As you continue reading below, we will provide you all the necessary tips like How to Backup Android Devices before installing any official firmwares or custom roms and many more.

Backup and some important tips

Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong. Read below for some important tips on how to backup Android data in a easy process:

Few more important things that you must remember before installing any custom ROMs or Official Firmwares:

  • You might face some problems in connecting your Android device to the computer. How to fix? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and KitKat.
  •  Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage.  Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?
  • Most of the tutorials and how-to guides on iDroid Horizon are for factory unlocked Android devices. We recommend NOT to try our guides if your device is locked to a carrier, unless we have specified the device model or carrier name.
If you find the above tips are helpful for you, please consider giving us a +1 or Like on our Facebook Fan Page to thank us!

Also See: How to Earn Real Cash with Android App — Journey To First $100,000

All set and ready? Good. You can now proceed to the tutorial below and Update Android One to Official Android 5.1 Lollipop [LMY47O] !

Remember:
  1. This tutorial for installing LMY47O Android 5.1.0 Lollipop is only for Android One devices. Please don’t try this with other Android device.
  2. This is an official Google firmware, not a custom ROM or a modified firmware.
  3. Make sure you backup all your data in your phone before proceeding.

Rooting Warning: This is an Official LMY47O Android 5.1 Lollipop update for Android One, which means you will lose root after installing this update. You will again have to root Android One to gain full system access and be able to install root apps again. We will post an article soon on How to Root Android One official firmware. So stay tuned with us.
NOTE: Don't factory reset your device before flashing, as this is an OTA update you can just flash it & get updated to Android Lollipop 5.1 even without losing a single piece of your phone data!

Entire Step-By-Step procedure:

Step 1 - Download Official LMY47O Android 5.1 Lollipop from here:
Step 2 - Connect and mount your Android One USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 5.1.0 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode :
  • Switch off the phone.
  • Press Power button + Volume Up simultaneously.
  • Select Recovery mode in options (read instructions at the top of screen to select recovery option)
  •  Wait for Micromax logo and then a Dead Android with exclaimation mark and "No Command" written below it.
  • Now hold Power then tap Volume up (follow the order properly) and leave it. Congratulations! You have now sucessfully booted into the stock recovery
 Step 6 - Once you are in Recovery Mod, select the Android 5.1 zip placed on your SD Card and confirm the installation on the next screen and the installation procedure should start now.

Step 7 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now

Your Android One will boot now and it might take about 5 minutes to boot on your first time. So, please wait!

Congratulation ! Your Android One should now have LMY47O Android 5.1 Lollipop Official ROM installed on your phone! Go to Settings > About phone to verify.
Read More

April 14, 2015

// // Leave a Comment

Update Moto G to Android L CyanogenMod 12 Custom Firmware

Android 5.0.2 Lollipop finally arrives on Moto G (also known as Motorola Moto G X1032) as Moto G specifications are suitable to receive Android L. Thanks to an unofficial release of CyanogenMod 12.1 ROM. It comes with all the working features as of CM12, and is still a work-in-progress release. Moto G comes with Android 4.3 Jelly Bean but it is officially upgradable to Android L which is not yet released. But CyanogenMod 12 is available to download and install which contain full features of Android L. This ROM has been tested only on XT1032. It should also be fully functional on XT1034 and GPe. CDMA users and XT1033 users are probably going to have a hard time making it a daily Moto G drivers.

Moto G to Android L CyanogenMod 12

As you continue reading below, we will guide you through the entire process of how to install Android 5.1 Lollipop CyanogenMod 12.1 ROM on Galaxy S3 I9300 using CyanogenMod. Don’t forget to backup all your apps and personal data as a precaution. It is always better to make a backup before doing anything with your Android device. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.

Salient Features of Android L CyanogenMod 12

This amazing CyanogenMod 12 custom ROM comes with tons of new features and is based on Android 5.0.2 Lollipop. A quick list of the main features in CyanogenMod 12.1 is given below and we are sure you’d love to use this on your Moto G.
  • Up to date with latest CM changes.
  • Re-enable performance profiles.
  • Update A2DP policy.
  • Removed platform-specific selinux policies and back to permissive mode.
  • Updated with latest CM changes. Should fully boot now. Make a clean install just in case.
  • Update build fingerprint for XT1032 GPe
  • Add ethernet via OTG feature.
  • Fixed AOSP camera issues.
  • The rest of the official device-specifics commits have been merged.
  • Fix a2dp sample rate.
  • Enabled NuPlayer instead of AwesomePlayer.
  • Added FFMPEG codecs for extended media support.

Complete Step by Step Procedure for installation:

We have put together a detailed step-by-step instructions guide on how to install CyanogenMod 12 Android 5.0.2 Lollipop custom firmware on Moto G. If you are used to installing custom ROMs on your Moto G, then this should not be any different for you. However, for beginners, you need to root your Moto G and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

Backup your all important data and apps because during any installation of a new custom ROM or Official Firmware , your device will be wiped and cleaned with new operating system. Make a backup for just in case, you never know when anything might go wrong.

Warning:
  • This tutorial is only for installing CyanogenMod 12 Android 5.0.2 ROM on Moto G. Please do not try on any other Moto variants.
  • This tutorial will wipe out all your data. Proceed at your own risk.
  • Make sure you backup all your data in your phone before proceeding.

Installation steps

Step 1 - Download CyanogenMod 12 Android 5.0.2 ROM for Moto G to your computer. 

Step 2 - Download PA GApps from our selection here: Official Updated PA Google Apps!

Step 3 - Now copy/paste the downloaded Android 5.0.2 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode.

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”. 

Step 7 - Install the downloaded Android L CyanogenMod 12 ROM  followed by GApps.

Step 9 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Moto G will boot now and it might take about 5 minutes to boot on your first time. So, please wait.

That’s it! Your Moto G should now have CyanogenMod 12 Android 5.0.2 Lollipop custom ROM installed on your phone! Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
Read More

April 13, 2015

// // Leave a Comment

Update Galaxy S3 I9300 to Android 5.1 Lollipop CyanogenMod 12.1 ROM

Android 5.1 Lollipop finally arrives on Galaxy S3 I9300, thanks to an unofficial release of CyanogenMod 12.1 ROM. It comes with all the working features as of CM12, and is still a work-in-progress release. So you should expect several bugs around in this ROM, but for those who haven’t yet experienced Lollipop, can give this custom firmware a try. If interested in Android 5.1 for other phones, check out our new Custom ROMs section. You can update Galaxy S3 I9300 to CyanogenMod 12.1 Android 5.1 Lollipop custom firmware using the tutorial below. This is not an official release by Samsung, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip file on your phone.

Android 5.1 Lollipop CyanogenMod 12.1

As you continue reading below, we will guide you through the entire process of how to install Android 5.1 Lollipop CyanogenMod 12.1 ROM on Galaxy S3 I9300 using CyanogenMod. Don’t forget to backup all your apps and personal data as a precaution. It is always better to make a backup before doing anything with your Android device. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial now.

CyanogenMod 12.1 Android 5.1 Lollipop ROM Features:

This amazing CyanogenMod 12.1 custom ROM comes with tons of new features and is based on Android 5.1 Lollipop. A quick list of the main features in CyanogenMod 12.1 is given below and we are sure you’d love to use this on your Galaxy S3 I9300:
  • Android 5.1 Lollipop.
  • Close to stock.
  • Customisation features.

Complete Steps for Installation of Android 5.1 Lollipop CyanogenMod 12.1 ROM

We have put together a detailed step-by-step instructions guide on how to install CyanogenMod 12.1 Android 5.1 Lollipop custom firmware on Galaxy S3 I9300. If you are used to installing custom ROMs on your Galaxy S3 I9300, then this should not be any different for you.
However, for beginners, you need to root your Samsung Galaxy S3 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

Also See: Gmail 5.0: Material Design from Android 5.0 Lollipop (Download APK)

Warning:
  • This tutorial is only for installing CyanogenMod 12.1 Android 5.1 ROM on Samsung Galaxy S3 I9300. Please do not try on any other Galaxy S III variants.
  • Your phone should be rooted and have ClockworkMod recovery installed from before.
  • This tutorial will wipe out all your data. Proceed at your own risk.
  • Perform a Dalvik Cache wipe before proceeding from the recovery mode.
  • Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
  • Make sure you backup all your data in your phone before proceeding.
Procedure:

Step 1 - Download CyanogenMod 12.1 Android 5.1 ROM for Galaxy S III to your computer.

Step 2 - Connect and mount your Galaxy S3 USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 5.1 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” as shown below. Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition” .

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 5.1 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.

Your Galaxy S3 I9300 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
That’s it! Your Galaxy S3 should now have CyanogenMod 12.1 Android 5.1 Lollipop custom ROM installed on your phone! Go to Settings > About phone to verify.

Hit +1 or LIKE to thank us!
If you run into any problems, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.
Read More

March 25, 2015

// // Leave a Comment

Rooted stock Lollipop 5.0.1 with Knox 0x0 for Galaxy S4 I9505

You can do the upgrade from your 4.4.2 KitKat, already rooted with Peppe130's method, as described here. You need Mobile Odin Pro and Odin 3.09 for Windows (this is the version that worked for me, I can't say whether different versions work equally well, they might). You also need the bootloader .tar for the version you are installing. The tar needs to include 6 .mbn files, aboot, rpm, tz, and sbl1-3.

Lollipop for Galaxy S4 I9505

Bootloader .tar for the OB7 firmware

PC Odin flashable files:

md5:1e02a99ed0a26a9acf5b12bdb1778c18

md5:1b81bec2b68f5bb70488c2c591a07a91

md5:06aa5d2c8f9f05e0e519bb30bc5fb2fd

Procedure for installing stock Samsung Lollipop firmwares with Knox 0x0. (I9505)

  • Factory reset your phone, and only install SuperSU and Mobile Odin Pro from the Play Store (you can obviously backup what you want beforehand with Titanium).
  • Run Mobile Odin Pro, accept the download of the required file, and then press OTA/Update ZIP and locate the UPDATE-SuperSU-v2.46.zip file you saved on your external SD.
  • Now press Open File... and choose the .tar.md5 firmware file you also saved a minute ago. Mobile Odin will automatically find and separate the different parts. 
  • Tick only Enable EverRoot, leave the other options (inject odin etc.) unticked. Then press Flash firmware.
  • It will ask to check the md5 file, say yes. Mobile Odin will then do the job automatically, and will upgrade your firmware to lollipop 5.01, the phone will then enter recovery, and then it will upgrade all your applications (about 215 of them). All this will take about 5 minutes.
  • After reboot, turn the phone off and enter Download mode. Run Odin 3.09 on your PC and put the bootloader file in the BL field.
  • Connect the phone, press Start and wait for the Pass.
  • After reboot, do another factory reset, and redownload SuperSU from Play Store after you go through the initial setup.
  • That was all; you now have a clean stock Samsung Lollipop firmware which is rooted, and the Knox flag remains at 0x0.
  • Two things are remaining, 
  • 1) Disable the Knox apps, you can do this with Titanium Backup by freezing all the Knox-related things, or you can delete the files manually (e.g. with adb), the forum is full of Knox-removal instructions..
  • 2)Using a root editor, edit the file /system/build.prop, and change the line ro.securestorage.support=false (it is normally set to =true). This solves various problems related to SELinux, also documented in our Blog.
Enjoy your rooted Lollipop phone! HIT 1+ or LIKE us on Facebook to Thank Us.

If you run into any problems during Updating Rooted stock Lollipop 5.0.1 with Knox 0x0 for Galaxy S4 I9505,  feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem. 
Read More